How to Perform a Calibration

How to Perform a Calibration

Calibration is performed when the motion sensors are unresponsive or not functioning properly, or if there are changes in the projector display.
Follow these steps to complete the calibration process:

1. Press the Settings button on the remote.
   
2. Use the arrow buttons to scroll down to Adjust Projection and then select Calibrate Motion Sensors.
3. Press Calibrate using the selection button.
   
4. When the calibration starts, a colored or black-and-white screen will appear. Please wait a few seconds until the menu screen reappears.
   

Please Note -

For the calibration to work effectively, ensure the surface is completely clear of objects and people during this process.
For example, items such as chairs, tables, or hand movements may interfere with the calibration process. 

• Related Articles

• How To Reboot Device

  How To Reboot Device We will Reboot Device if the calibration did not solve our issue. The Reboot will also include a calibration and will take a few minutes to complete. To preform a Reboot follow these steps: Press the settings button on the top ...

• No Sound

  No Sound Ensure the system is not on Mute. Verify that the Volume Buttons are functioning properly. Perform a Reboot.

• Touchscreen Not Responding

  Clear the projection area of any objects. Go to Settings, and use the arrow buttons to navigate to the Adjust Projection tab. Then, select Calibration Motion Sensor. While the motion sensors are calibrating, ensure the projection area remains clear. ...

• Beam Mobile: Switching Playmodes

  The Beam Mobile features two Playmodes : Wall and Table. To switch between modes, follow these steps: 1. Press the Settings button on the remote and select Playmode. Choose the desired projection mode by clicking OK. 2. Press 'Set Playmode'. 3. At ...