Using The Remote
1. To stop an activity press the home button (top right of remote)
2. To return to the previous page press the back button
Please Note
- Avoid pressing buttons repeatedly, as this may disrupt the system's operation.
- There is no need to point the remote at the system, as it connects via USB.
- After pressing the power button, there will be a slight delay of a few seconds. Please wait patiently.
Related Articles
How To Reboot Device
How To Reboot Device We will Reboot Device if the calibration did not solve our issue. The Reboot will also include a calibration and will take a few minutes to complete. To preform a Reboot follow these steps: Press the settings button on the top ...Navigating EyeWiz
By using the remote press the ON button (red button top left) to turn on the system. 1. The Grade Menu is where you can choose your desired grade by navigating left or right. This menu serves as the systems main screen and appears when the system is ...How to Perform a Calibration
How to Perform a Calibration Calibration is performed when the motion sensors are unresponsive or not functioning properly, or if there are changes in the projector display. Follow these steps to complete the calibration process: Press the Settings ...Beam Mobile: Switching Playmodes
The Beam Mobile features two Playmodes : Wall and Table. To switch between modes, follow these steps: 1. Press the Settings button on the remote and select Playmode. Choose the desired projection mode by clicking OK. 2. Press 'Set Playmode'. 3. At ...